Delivery program steel strip
Stainless steel strip
Material
In accordance with quality standard DIN EN 10088-2 (formerly DIN EN 17440-4)
| Mat. no. | Short designation DIN / EN | AISI | Strength N / mm | Type |
|---|---|---|---|---|
| 1.4016 | X 6 CR 17 | 430 | 450 – 600 | annealed |
| 1.4021 | X 20 CR 13 | 420 | 1400 – 1550 | hardened/polished |
| 1.4028 | X 30 CR 13 | 1550 – 1700 | hardened/polished | |
| 1.4034 | X 46 CR 13 | 1700 – 1850 | hardened/polished | |
| 1.4113 | X 6 CR MO 17 1 | 480 – 630 | annealed | |
| 1.4301 | X 5 CR NI 18 10 | 304 | 500 – 700 | annealed |
| bis ca. 1100 | hard-rolled | |||
| 1.4310 | X 12 CR NI 17 7 | 301 | 1100 – 1800 | hard-rolled |
| DIN EN 10151 | ||||
| 1.4404 | X 2 CR NI MO 17 13 2 | 316L | 490 – 690 | annealed |
| 1.4541 | X 6 CR NI TI 18 10 | 321 | 500 – 730 | annealed |
| 1.4571 | X 6 CR NI MO TI 17 12 2 | 316Ti | 500 – 730 | annealed |
| 1.4828 | X 15 CR NI SI 20 12 | 309 | 500 – 750 | heat-resistant/1000°C |
| 1.4841 | X 15 CR NI SI 25 20 | 310 | 550 – 800 | heat-resistant/1150°C |
Dimensions
Width: 8 – 1000 mm
Thickness: 0,3 – 5 m
Tolerances for slit strips in accordance with DIN EN ISO 9445 (formerly DIN EN 10259 or for precision strip in accordance with DIN EN 10258)
Types/surfaces
1 D: Hot-rolled, heat-treated, mechanically descaled, optically matt (formerly DIN EN 17440-4, method II A)
2 B: Descaled, cold-rolled, heat-treated, pickled, lightly rerolled, optically milky (formerly DIN EN 17440-4, method III C)
2 R: Descaled, cold-rolled, bright-annealed, optically bright (formerly DIN EN 17440-4, method III D)
2 H: Strain-hardened/hard-rolled, optically between bright and milky matt (formerly DIN EN 17224, method III A)
Also brushed or ground, grain sizes 100, 180, 240 and 320
Edge finish
– Slit edges
– Edges removed by rolling
– Mechanical rounded edges
– die Kanten sind gratarm geschnitten, walzentgratet oder strehlarrondiert
Forms of delivery
– with or without paper interleaving, foil-coated in different qualities according to the requirements made
– in coils: coil inside diameter 400 or 508 mm Coil outside diameter by arrangement (up to approx. 1200 mm) Packed on throw-away pallets or Europallets, coils bound with steel hoop lengthways and crossways,unpackaged or with foil hood
– packed on throw-away pallets or Europallets, coils bound with steel hoop lengthways and crossways,unpackaged or with foil hood – In bars: straightened from strip, bar length as the customer desires
Documentation
With mill test certificate in accordance with DIN EN 10204-3.1 (2005)
Delivery period
Slit from stock: approx. 2 – 3 weeks
From new production at works: approx. 3 – 5 months
Stainless precisionsteel strip
Slit from stock
| Thickness mm² | Tensile-Strength 1100-1300 | Tensile-Strength 1300-1500 | Tensile-Strength 1500-1700 |
|---|---|---|---|
| 0,2 | • | • | |
| 0,25 | • | • | • |
| 0,3 | • | • | • |
| 0,35 | • | • | • |
| 0,4 | • | • | • |
| 0,45 | • | • | • |
| 0,5 | • | • | • |
| 0,6 | • | • | • |
| 0,7 | • | • | • |
| 0,8 | • | • | • |
| 1 | • | • | |
| 1,2 | • | • | |
| 1,5 | • | • |
Material
1.4310
quality standard
DIN EN 10088-2 (früher DIN 17224)
Width
6 – 300 mm
Tolerances
DIN EN ISO 9445 (formerly DIN 10258)
Types
Cold-rolled, method 2 H (formerly III A)
Edge finish
– Slit edges
– Edges removed by rolling 6 mm width
– messerarrondiert (gestrehlte) Kanten, mind. 6 mm width
– die Kanten sind gratarm geschnitten, walzentgratet oder strehlarrondiert
Forms of delivery
– In coils, coil packaging according to your specifications
– Coil inside diameter 400/500 mm, on Europallets or throw-away pallets
– With foil cover
Documentation
With mill test certificate in accordance with DIN EN 10204-3.1 (2005)
Delivery period
Approx. 2 – 3 weeks
Carbon steel strips
From new production
Material
C 15 E / C 22 E / C 45 E / C 55 S / C 60 S / C 67 S / C 75 S / C 85 S / C 100 S / 51 Cr V 4 / 100 Cr 6 / 16 Mn Cr 5 / 42 Cr Mo 4 / and many more
in accordance with DIN EN 10132-3 and -4 (formerly DIN 17222)
Quality standard
Width: 10 – 420 mm
Thickness: 0,2 – 4 mm
Tolerances in accordance with DIN EN 10140 (formerly DIN 1544)
Types
MA-RL (annealed, smooth surface) or annealed, hard-rolled or hardened, polished if necessary, with sheared or machined edges, in coils or bars.
Die Kanten sind gratarm geschnitten, walzentgratet oder strehlarrondiert.
Documentation
With inspection certificate in accordance with DIN EN 10204-3.1 (2005)
Delivery period
Approx. 6 – 10 weeks
Carbon steel strips, annealed
Slit from stock
Material
In accordance with DIN EN 10132-4 (formerly DIN 17222)
| Mat. no. | Short name | C | Si | Mn | P max | S max | Cr max | Mo max | Ni max | Tensile-Strength N/mm | Elongation at fracture A 80 e |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.1231 | C 67 S | 0,65 | 0,15 | 0,6 | 0,025 | 0,025 | 0,4 | 0,1 | 0,4 | 510-600 | min. 16% |
| -0,72 | -0,35 | -0,9 | |||||||||
| 1.1248 | C 75 S | 0,7 | 0,15 | 0,6 | 0,025 | 0,025 | 0,4 | 0,1 | 0,4 | 510-600 | min. 15% |
| -0,8 | -0,35 | -0,88 |
Dimensions
Width: 6 – 190 mm
Limitation of width tolerance to max. 0.2 mm possible
Thicknesses: 0.3/0.4/0.5/0.6/0.7/0.8/1.0/1.2/1.5 mm
Tolerances in accordance with DIN EN 10140 (formerly DIN 1544)
Types
MA-RL (soft, smooth surface)
The edges are sheared largely free of burrs or are deburred by rolling.
The material is lightly greased as is usual in the trade.
Forms of delivery
– In coils with coil inside diameter 400 or 508 mm, coil outside diameter 800 – 900 mm or smaller coils by arrangement.
– Packed on throw-away pallets or Europallets, coils bound with steel hoop lengthways and crossways, covered in foil.
Documentation
With mill test certificate in accordance with DIN EN 10204-3.1 (2005)
Delivery period
Approx. 1 – 2 weeks
Carbon Steel Strips 75 S + QT, hardened and polished
Slit from stock
Dimensions
Width: 6 – 300 mm
| Thickness in mm:: | 0,2 | 0,3 | 0,5 | 0,6 | 0,7 | 0,8 |
|---|---|---|---|---|---|---|
| Tensile-Strength in N/mm | 1500-1700 | 1500-1700 | 1500-1700 | 1300-1500 | 1300 -1500 | 1300-1500 |
Types
– In accordance with DIN EN 10132-4 (formerly DIN 17222)
– Brush polish, lightly greased, edges deburred by rolling, otherwise the same as the soft spring band steel above.
Documentation
With mill test certificate in accordance with DIN EN 10204-3.1 (2005)
Delivery period
Approx. 1 – 2 weeks
Cold-rolled steel strip
From new production
Material
In accordance with quality standard DIN EN 10139 (formerly DIN 1624)
| Mat. no. Short name | 1.0330 DC 01 | 1.0347 DC 03 | 1.0338 DC 04 |
|---|---|---|---|
| Strength in N/mm | |||
| A annealed: | 270-390 | 270-370 | 270-350 |
| LC | 270-410 | 270-370 | 270-350 |
| C 290 | 290-430 | 290-390 | 290-390 |
| C 340 | 340-490 | 340-440 | 340-440 |
| C 390 | 390-540 | 390-490 | 390-490 |
| C 440 | 440-590 | 440-540 | 440-540 |
| C 490 | 490-640 | 490-590 | 490-590 |
| C 590 | 590-740 | min. 590 | 590-690 |
| C 690 | min. 690 | – | – |
Dimensions
Width: 5- 680 mm
Thickness: 0,2 – 5,0 mm
Tolerances in accordance with DIN EN 10140 (formerly DIN 1544)
Types
Edges:
sheared edges (GK),
mill edges (NK),
rounded-off edges (AK)
Surfaces
Standard MA-RL
MA = bright (formerly BK)
RL = smooth surface (formerly LG) – MB or MC
MB = free of cracks and pores (formerly RP)
MC = free of cracks and pores, brilliant (formerly RPG)
With mill test certificate in accordance with DIN EN 10204-3.1 (2005)
Forms of delivery
– In coils: wound in single layer, coil inside diameter 400 or 508 mm, coil outside diameter of your choice or in spooled coils Packed on throw-away pallets or Europallets
– In bars: straightened from strip, bar length as the customer desires
Documentation
With mill test certificate in accordance with DIN EN 10204-3.1 (2005)
Delivery period
Approx. 4 – 6 weeks
Slited steel strip
Slit from stock
Material
In accordance with DIN EN 10130 (formerly DIN 1623), annealed
| Mat. no. Short name | 1.0330 DC 01 | 1.0347 DC 03 | 1.0338 DC 04 |
|---|---|---|---|
| formerly DIN 1623 | St 1203 | St 1303 | St 1403 |
| galvanised DIN-EN10142 | DX 51 D+Z | DX 53 D+Z | DX 54 D+Z |
Dimensions
Width: 5 – 1000mm
Thickness: 0,4 – 3,0 mm
Tolerances in accordance with DIN EN 10131, (formerly DIN 1541), galvanised DIN EN 10143
Forms of delivery
– Sheared edges, wound in single layer, in coils or bars, on throw-away pallets or Europallets
Documentation
With mill test certificate in accordance with DIN EN 10204-3.1 (2005)
Delivery period
Approx. 2 – 3 weeks