Delivery programSTEEL STRIP
STAINLESS STEEL STRIPS
Material
In accordance with quality standard DIN EN 10088-2 (formerly DIN EN 17440-4)
Mat. no. | Short designation DIN / EN N / mm | AISI | Strength | Type |
---|---|---|---|---|
4016 | X 6 CR 17 | 430 | 450 – 600 | annealed |
4021 | X 20 CR 13 | 420 | 1400 – 1550 | hardened/polished |
4028 | X 30 CR 13 | 1550 – 1700 | hardened/polished | |
4034 | X 46 CR 13 | 1700 – 1850 | hardened/polished | |
4113 | X 6 CR MO 17 1 | 480 – 630 | annealed | |
4301 | X 5 CR NI 18 10 | 304 | 500 – 700 | annealed |
until approx 1100 | hard-rolled | |||
4310 | X 12 CR NI 17 7 | 301 | 1100 – 1800 | hard-rolled |
DIN EN 10151 | ||||
4404 | X 2 CR NI MO 17 13 2 | 316L | 490 – 690 | annealed |
4541 | X 6 CR NI TI 18 10 | 321 | 500 – 730 | annealed |
4571 | X 6 CR NI MO TI 17 12 2 | 316Ti | 500 – 730 | annealed |
4828 | X 15 CR NI SI 20 12 | 309 | 500 – 750 | heat-resistant/1000° |
4841 | X 15 CR NI SI 25 20 | 310 | 550 – 800 | heat-resistant/1150° |
Dimensions
Width: 8 – 1000 mm
Thickness: 0,3 – 5 mm
Tolerances for slit strips in accordance with DIN EN ISO 9445 (formerly DIN EN 10259 or for precision strip in accordance with DIN EN 10258)
Types/surfaces
1 D: Hot-rolled, heat-treated, mechanically descaled, optically matt (formerly DIN EN 17440-4, method II A)
2 B: Descaled, cold-rolled, heat-treated, pickled, lightly rerolled, optically milky (formerly DIN EN 17440-4, method III C)
2 R: Descaled, cold-rolled, bright-annealed, optically bright (formerly DIN EN 17440-4, method III D)
2 H: Strain-hardened/hard-rolled, optically between bright and milky matt (formerly DIN EN 17224, method III A)
Also brushed or ground, grain sizes 100, 180, 240 and 320
Edge finish
– Slit edges
– Edges removed by rolling
– Mechanical rounded edges
Forms of delivery
– With or without paper interleaving, foil-coated in different qualities according to the requirements made
– In coils: coil inside diameter 400 or 508 mm Coil outside diameter by arrangement (up to approx. 1200 mm)
Packed on throw-away pallets or Europallets, coils bound with steel hoop lengthways and crossways,unpackaged or with foil hood
– In bars: straightened from strip, bar length as the customer desires
Documentation
With mill test certificate in accordance with DIN EN 10204-3.1 (2005)
Delivery period
Slit from stock: approx. 2 – 3 weeks
From new production at works: approx. 3 – 5 months
STAINLESS PRECISIONSTEEL STRIPS
Slit from stockMaterial
1.4310
Quality standard
DIN EN 10088-2 (formerly DIN 17224)
Width
6 – 300 mm
Tolerances
DIN EN ISO 9445 (formerly DIN 10258)
Types
Cold-rolled, method 2 H (formerly III A)
Edge finish
– Slit edges
– Edges removed by rolling
– Mechanical rounded edges
Forms of delivery
– In coils, coil packaging according to your specifications
– Coil inside diameter 400/500 mm, on Europallets or throw-away pallets
– With foil cover
Documentation
With mill test certificate in accordance with DIN EN 10204-3.1 (2005)
Delivery period
Approx. 2 – 3 weeks
Thickness mm² | Tensile-Strength 1100-1300 | Tensile-Strength 1300-1500 | Tensile-Strength 1500-1700 |
---|---|---|---|
0,2 | • | • | |
0,25 | • | • | • |
0,3 | • | • | • |
0,35 | • | • | • |
0,4 | • | • | • |
0,45 | • | • | • |
0,5 | • | • | • |
0,6 | • | • | • |
0,7 | • | • | • |
0,8 | • | • | • |
1 | • | • | |
1,2 | • | • | |
1,5 | • | • |
CARBON STEEL STRIPS
From new production
Material
C 15 E / C 22 E / C 45 E / C 55 S / C 60 S / C 67 S / C 75 S / C 85 S / C 100 S / 51 Cr V 4 / 100 Cr 6 / 16 Mn Cr 5 / 42 Cr Mo 4 / and many more
in accordance with DIN EN 10132-3 and -4 (formerly DIN 17222)
Quality standard
Width: 10 – 420 mm
Thickness: 0,2 – 4 mm
Tolerances in accordance with DIN EN 10140 (formerly DIN 1544)
Types
MA-RL (annealed, smooth surface) or annealed, hard-rolled or hardened, polished if necessary, with sheared or machined edges, in coils or bars.
Documentation
With inspection certificate in accordance with DIN EN 10204-3.1 (2005)
Delivery period
Approx. 6 – 10 weeks
CARBON STEEL STRIPS, ANNEALED
Slit from stock
Material
In accordance with DIN EN 10132-4 (formerly DIN 17222)
Mat. no. | Short name | C | Si | Mn | P max | S max | Cr max | Mo max | Ni max | Tensile-Strength N/mm | Elongation at fracture A 80 e |
---|---|---|---|---|---|---|---|---|---|---|---|
01.01.31 | C 67 S | 0,65 | 0,15 | 0,6 | 0,025 | 0,025 | 0,4 | 0,1 | 0,4 | 510-600 | at least 16% |
-0,72 | -0,35 | -0,9 | |||||||||
01.01.48 | C 75 S | 0,7 | 0,15 | 0,6 | 0,025 | 0,025 | 0,4 | 0,1 | 0,4 | 510-600 | at least 15% |
-0,8 | -0,35 | -0,88 |
Dimensions
Width: 6 – 190 mm
Limitation of width tolerance to max. 0.2 mm possible
Thicknesses: 0.3/0.4/0.5/0.6/0.7/0.8/1.0/1.2/1.5 mm
Tolerances in accordance with DIN EN 10140 (formerly DIN 1544)
Types
MA-RL (soft, smooth surface)
The edges are sheared largely free of burrs or are deburred by rolling.
The material is lightly greased as is usual in the trade.
Forms of delivery
– In coils with coil inside diameter 400 or 508 mm, coil outside diameter 800 – 900 mm or smaller coils by arrangement.
– Packed on throw-away pallets or Europallets, coils bound with steel hoop lengthways and crossways, covered in foil.
Documentation
With mill test certificate in accordance with DIN EN 10204-3.1 (2005)
Delivery period
Approx. 1 – 2 weeks
CARBON STEEL STRIPS 75 S + QT, HARDENED AND POLISHED
Slit from stock
Dimensions
Width: 6 – 300 mm
Thickness in mm: | 0,2 | 0,3 | 0,5 | 0,6 | 0,7 | 0,8 |
---|---|---|---|---|---|---|
Tensile-Strength in N/mm | 1500-1700 | 1500-1700 | 1500-1700 | 1300-1500 | 1300 -1500 | 1300-1500 |
Types
– In accordance with DIN EN 10132-4 (formerly DIN 17222)
– Brush polish, lightly greased, edges deburred by rolling, otherwise the same as the soft spring band steel above
Documentation
With mill test certificate in accordance with DIN EN 10204-3.1 (2005)
Delivery period
Approx. 1 – 2 weeks
COLD-ROLLED STEEL STRIP
From new production
Material
In accordance with quality standard DIN EN 10139 (formerly DIN 1624)
Mat. no. Short name | 1.0330 DC 01 | 1.0347 DC 03 | 1.0338 DC 04 |
---|---|---|---|
Strength in N/mm | |||
A annealed: | 270-390 | 270-370 | 270-350 |
LC | 270-410 | 270-370 | 270-350 |
C 290 | 290-430 | 290-390 | 290-390 |
C 340 | 340-490 | 340-440 | 340-440 |
C 390 | 390-540 | 390-490 | 390-490 |
C 440 | 440-590 | 440-540 | 440-540 |
C 490 | 490-640 | 490-590 | 490-590 |
C 590 | 590-740 | at least 590 | 590-690 |
C 690 | at least 690 | – | – |
Dimensions
Width: 5- 680 mm
Thickness: 0,2 – 5,0 mm
Tolerances in accordance with DIN EN 10140 (formerly DIN 1544)
Types
Edges:
sheared edges (GK),
mill edges (NK),
rounded-off edges (AK)
Surfaces
Standard MA-RL
MA = bright (formerly BK)
RL = smooth surface (formerly LG) – MB or MC
MB = free of cracks and pores (formerly RP)
MC = free of cracks and pores, brilliant (formerly RPG)
With mill test certificate in accordance with DIN EN 10204-3.11
Forms of delivery
– In coils: wound in single layer, coil inside diameter 400 or 508 mm, coil outside diameter of your choice or in spooled coils Packed on throw-away pallets or Europallets
– In bars: straightened from strip, bar length as the customer desires
Documentation
With mill test certificate in accordance with DIN EN 10204-3.1 (2005)
Delivery period
Approx. 4 – 6 weeks
SLITED STEEL STRIP
Slit from stock
Material
In accordance with DIN EN 10130 (formerly DIN 1623), annealed
Mat. no. Short name | 1.0330 DC 01 | 1.0347 DC 03 | 1.0338 DC 04 |
---|---|---|---|
formerly DIN 1623 | St 1203 | St 1303 | St 1403 |
galvanised DIN-EN10142 | DX 51 D+Z | DX 53 D+Z | DX 54 D+Z |
Dimensions
Width: 5 – 1000mm
Thickness: 0,4 – 3,0 mm
Tolerances in accordance with DIN EN 10131, (formerly DIN 1541), galvanised DIN EN 10143
Forms of delivery
– Sheared edges, wound in single layer, in coils or bars, on throw-away pallets or Europallets
Documentation
With mill test certificate in accordance with DIN EN 10204-3.1 (2005)
Delivery period
Approx. 2 – 3 weeks